交换机提示channel misconfig

作者:思科培训 来源:来自网络 发布时间:09-11-22

学员提问:

将VLAN 放到Lacp 协议链路汇聚起来的trunk上面
2台设备刚开始是可以bind起来的,但是一会 cisco 3750 就提示 port-channel misconfig 的 ,然后就down了
CISCO的配置如下:
interface port-channel 1
switchport trunk encapsulation dot1q
switchport mode trunk


!
interface GigabitEthernet1/0/1
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode active
!
interface GigabitEthernet1/0/2
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode active
!


2个设备刚刚开始是bind 起来, 后面就down 了。

 

捷盈讲师及学员解答:

在两边交换机上看一下show int trunk看没有mis-match